In the warm season, I don’t care, but in the cold for me, an under-dried head = SARS. As it turned out there cars
they work in hairdressing salons for wear and tear, and once in a couple of years of such operation it is necessary to sharpen a knife … It was even possible to put up with a NiMh battery, but their knife is a consumable and it needs to be changed periodically (and this is for domestic use. )
Disassembling: < br /> There is a completely opposite attitude. The machine cannot work from it.
Plastic nozzles from the kit:
Next, I’m going to work in another city for several months. The capacity of one can is 600mAh, the battery capacity is 1800mAh This machine is essentially the same, differing in the presence or absence of a titanium coating on the knife. Idling
If the batteries are completely dead or not working, the machine can be operated from this power supply! Philips can’t do that. He takes the machine and goes to zero … Further, the course of the knife becomes very tight and if nothing is done, the motor will simply burn out.
The machine itself and the knives are made in Germany: But there are also punctures with such an algorithm. Without a comb, it is impossible to make a haircut on your own, the comb costs almost the same as the whole machine … And then household Moser Hungarian assembly with a small knife and a NiMh battery. – instruction Having decided on the model, I decided to take ChromStyle Pro.
Last year I bought a set of metal nozzles offline: Philips never dreamed of such a quality haircut! All and at once no "antennas"! A wide knife grabs more.
The 1s3p battery is made using LiFePo4 technology from 14500 cans. It turned out to be convenient at the time. I took the same Philips but on a battery. Impressions from the operation are only positive. But basically the masters are normal. Power supply: As a result, two fully working machines lay dead weight.
Features: In general, I appreciated this device and stopped going to the hairdresser. Therefore, after a while, you have to lubricate the knife like on any other machine. Of the top-end machines at that time, ChromStyle (on a NiCd battery) and the new version of ChromStyle Pro (on lithium), the rest of the machines are like two drops of water, the knives are compatible, the body is the same. Board: At first I liked Panasonic for. Philips just spits on the client something broke / broke not our problems throw away the whole device and buy a new one or do whatever you want … The power supply is the charger. To which he told me that I would need to sharpen the knife in so many years
Knives removed from the machine: Therefore, almost always you have to ask to finish drying and sometimes more than once. I clarify once again does she know what this haircut is and what it looks like? Yes, I know everything. Are they saving electricity? Those. the battery has sat down, you will not finish the haircut with the wire, wait until the battery is charged in 16 hours (NiMh). In the nineties, I went to work in another city, after a while it was overgrown and I had to put everything in order. Now the price has become a little lower, which pleases. I used to go to the hairdresser like most people. Voltage and internal resistance of a fully charged battery with a https://jiji.com.et/accessories-and-supplies-for-electronics/large-format standard charger: Today I will tell you about the purchase and operation of the Moser ChromStyle Pro hair clipper. This is the company’s policy! Bought from a shop that sells these machines.
Next, I began to look into the professional segment. This suits me.
Of course, I was upset when I found the Moser SC in my city and called there … The final was the same after 1.5 years. Saving time and money! – oil
Machine: I talked with the master and told me what amount of work I do with a typewriter …

Moser 1871 ChromStyle Pro clipper after 6 years

The knife can not
lubricate for some very short time … Delivery in 2013 was long, but this was the case with all attempts from abroad. Plus, the comb ceases to be fixed and you have to hold it with your hand … Everything turned out to be sad, either the nameless NoName for $10 or the Panasonic for $150 (which is three times higher than its regular price) and there are no more options! As a result, I bought this NoName powered by 220v and removable nozzles (by the way, the nozzles in this nameless creation are of the type like on Moser, and not retractable like on Philips). At the moment, this machine is used by 1 adult and two children, i.e. haircuts only with this machine Knife thinks to get blunt! In any case, he paid off with one haircut! This machine worked for a year and a half, first the switch burned out (it was excluded from the circuit), and then the motor burned out with smoke that filled the entire apartment … It may seem that the machine is expensive, but in fact it is cheaper to use it than Phillips! In general, I had to cut my hair to zero …
And in the middle of the 2000s, Philips released a clipper for self-clipping and began to advertise it. I wanted the “Platform” haircut that was then fashionable, then literally a few per city were taken for it. This lot is no longer in the history, so I provide a link to a similar lot.
Measured capacity after 6 years of operation: Power connector/contacts
Knife block has 5 positions from 0.7mm minimum to 3mm: In general, I began to look further. < br /> Purchase: Over time, both machines began to break the teeth on the combs. The city is very expensive in terms of prices for services … Also in this machine there was one significant drawback. In general, I immediately thought of buying such a Philips locally (1.5 haircuts and it paid off). It differed from the first only by a switching power supply. A few years ago, my typewriter fell on the tile and the plastic part in the knife broke and the knife stopped holding. Now I’ll add an impression of Moser and its customer care. But I did step on the rake again. Box: In general, I was angry this time at Phillips! And not even on its cheap design, but on the inherent rapid aging and the complete absence of parts. If earlier a hairdresser and home in the shower, now a haircut in the bathroom and immediately in the shower. The “lubrication-free” knife is also pure marketing. -charging glass – brush This is a little annoying, despite the fact that for this very drying they take extra money to the cost of a haircut. 1.JPG” /”> -car I went to a salon in the city center … – They dry badly … – After the haircut, it is advisable to take a shower because hair is still frizzy. Then it overgrown for several months.
Voltage at which the overdischarge protection is triggered: It turned out that the SC has ANY part from ANY typewriter in stock here and now! Plus they sharpen knives. For a good result, the algorithm is simple: we go to the salon in the city center if the master did well and go to this master. I collected all these working machines and sold them on the classifieds site, and I started looking for an alternative for myself. Good day, Muska readers!
Nevertheless, for me, a haircut at a hairdresser has two big disadvantages: As a result, this Philips ~ $20 was bought. – 4 plastic nozzles: 3, 6,9 and 12 mm (three left) – power supply
Kit: The machine is low-voltage with a power adapter (at that time transformer) and a nozzle with a variable length. Further, Philips was bought again for $ 20 (the first one remained with the parents). The machine was bought on ebay in 2013 ~$200. And then the master says yes, I’ll do everything for such and such a price. Board test.
To begin with, the story of how I came to do my own haircut with a clipper, and then to Moser products: